vizco-extrusion-line.jpgExtrusion line at the Monticello, Florida factory.

ASTM E 84 - CLASS A RATING:

 Flame Spread Index Smoke Developed Index 
Class A  0-25  0-450 

MATERIAL PROPERTIES

PROPERTIESASTM METHOD VALUE
Izod Impact D-256 12.0 ft-lbs/in
Tensile Strength D-638 8,900 psi
Flexural Strength D-790 13,500 psi
Flexural Modulus D-790 345,000 psi
Rockwell Hardness D-785 112 R
HDTUL Unannealed
(264 psi)
D-648 270 F

USED BY CODE OFFICIALS AND REGULATORY AGENCIES IN THE ACCEPTANCE OF INTERIOR FINISH MATERIALS FOR VARIOUS APPLICATIONS.
THE MOST WIDELY ACCEPTED CLASSIFICATION SYSTEM DESCRIBED IN THE NATIONAL FIRE PROTECTION ASSOCIATION PUBLICATION NFPA 101 LIFE SAFETY CODE.
CHARACTERIZES THE RELATIVE RATE AT WHICH FLAME WILL SPREAD AS THE SUBJECT MATERIAL BURNS.

UL94 FLAMMABILITY RATING

SPECIMENS MAY NOT BURN WITH FLAMING COMBUSTION FOR MORE THAN 30 SECONDS AFTER EITHER APPLICATION OF THE TEST FLAME.
THE STANDARD FOR SAFETY OF FLAMMABILITY OF PLASTIC MATERIALS

vizco-company-headquarters.jpgVizCO Corporate office in Bradenton, Florida.

SecureFLX is designed to be safer and physically outperform every other drain pan at a superior price point.

Our goal is to provide a product with the following characteristics: self extinguishing, low smoke, flexibility, extreme strength and to perform without failure at a higher temperature range than any other non-metallic solution.

The result is a cost effective material unlike anything on the market.

Independent laboratories have tested and rated our material to meet or exceed ASTM E-84 class A and UL-94 testing and performance standards.

approved.jpg

Mechanical Properties

Temperature Range: -20ºF to 260ºF
Distortion Temperature: 310ºF
Load Support (LBS): 1000+
Flame Retardant
Self-Extinguishing
Low Smoke