ICC-ES Report

(see below)

TOUGH PANS Dry Lift & Pro are approved for gas & electric water heaters

Products are certified by ICC to be in compliance with the IPC, UPC and IRC. The official ICC report will be listed in the ICC-ES directory.

Search via "Listing Number" 1384 or "Company" Vizco.

Please direct any code approval questions to:

Howard Guard
Sales Manager

VizCO US, Inc.
4708 Manatee Ave W.
Suite 103
Bradenton, FL 34209
PH: 941-753-3333 x 1000 - FAX 941-896-9973
howard@vizco.com
Maribel Campos
Director of Standards, ICC-ES PMG

ICC Evaluation Service, LLC
Western Regional Office
3060 Saturn Street, Suite 100
Brea, CA 92821
Tel: 562-699-0543 x3578
mcampos@icc-es.org
image

EVALUATION SUBJECT:

VIZCO WATER HEATERS DRAIN PANS

DIVISION:

10 00 00—SPECIALTIES

SECTION:

10 00 00—SPECIALTIES (DRAIN PANS)

Report Holder:

VIZCO US, INC.

4708 MANTEE AVE WEST, UNIT 103
BRADENTON, FL 34209

image
image

ICC-ES PMG Listing PMG-1384

image

Effective Date: June
This listing is subject to re-examination in one year.

www.icc-es-pmg.org (800) 423-6587 • (562) 699-0543 A Subsidiary of the International Code Council®
CSI:
DIVISION: 10 00 00—SPECIALTIES
Section: 10 00 00—Specialties (Drain Pans)

Product certification system:
The ICC-ES product certification system includes testing samples taken from the market or supplier'stock, or combination of both, to verify compliance with applicable codes and standards. The system also involves factory inspections, and assessment and surveillance of the supplier's quality system.

Product:
VizCO Water Heaters Drain Pans

Listee:
VizCO US, Inc.
4708 Mantee Ave West, Unit 103 Bradenton, Florida 34209
www.VizCO.com

Commpliance with the following codes:
2015, 2012 and 2009 International Plumbing Code® (IPC)
2015, 2012 and 2009 International Residential Code® (IRC)
2015, 2012 and 2009 Uniform Plumbing Code® (UPC)*

*Copyrighted publication of the International Association of Plumbing and Mechanical Officials

Compliance with the following standards:
ASTM E 84, Test Method for Surface Burning Characteristics of Building Materials

Indetification:
The water heater pans shall be marked with the manufacturer's name as well as the ICC-ES PMG certification mark.

Installation:
The water heater pans shall be installed in accordance with the manufacturer's published instructions and the applicable code(s).

Installation of the water heater pans shall be in accordance with Section P2801.6 of the IRC, Section 504.7 of the IPC, and 507.5 of the UPC.

image Listings are not to be construed as representing aesthetics or any other attributes not specifically addressed, nor are they to be construed as an endorsement of the subject of the listing or a recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as to any finding or other matter in this listing, or as to any product covered by the listing.

Copyright © 2016 ICC Evaluation Service, LLC. All rights reserved.Page 1 of 2

PMG-1384 | Most Widely Accepted and Trusted Page 2 of 2

Models:
The water heater pans models list in this report are made of corrosion-resistance material having a flame spread index of no more than 5 and smoke development index of no more than 450 and are available with either a 1" PVC or 1" CPVC drain pan fitting.

Dry Lift Series - available in sizes 23", 25", and 27" diameters; 2.5" depth; 0.10" thickness

Pro Series - available in sizes 23", 25", 27" and 31" diameters; 2.5" depth; .10" thickness

Conditions of listing:
  1. The Authority Having Jurisdiction for the area in which this product is to be installed, shall have the final decision for compliance to Section P2801.6 of the IRC, Section 504.7 of the IPC, and 507.5 of the UPC.
  2. Installation shall be in accordance with the manufacturer's instructions and the requirements of the code sections references above.
  3. The water heater pans are manufactured in Monticello, Florida under a quality control pro with an annual surveillance inspection by ICC-ES.


image